Planning Devo Relay deployment
Before starting with the relay installation, make sure you can provide a machine with the following requirements:
Note that your required storage should be calculated in relation to the data ingest. Higher volumes of data would allow you to handle potential long downtimes in the network better.
Learn more about this in Relay buffers
Supported Operating Systems
Ensure that the relay can access the following resources:
For USA users
For EU users
For GCP (Spain) users
These are the ports used by the relay:
These ports should not be used by any other services.
Devo Relay can be deployed as a single node or in a cluster for High Availability (HA).
Single node requirements
One machine with the requirements listed above
One IP address for the relay
HA active-passive with 2 nodes
Two machines with the requirements listed above in the same network
3 IP addresses (one per node and one for the virtual IP)
Compatibility between Devo Relay and Devo platform deployments
We strongly recommend using Devo Relay v2.0.0 if you are using Devo with platform version 7.1.X or above.
Devo Relay version
Devo platform version
1.4.2 and below
7.1.X or above
You can check your Devo environment platform version by clicking Help → Customer Support from the Devo navigation pane. The platform version appears at the left bottom corner of the window.